Metric

Metric High Capacity, Low Profile Swing Clamps, Bottom Flange/Manifold Mount

Single And Double Acting

High Capacity Body construction reduces leak paths and improves rigidity . Low profile metric swing clamp arm details. High clamp force capacity in compact package. Manifold mounting capability or porting. See metric Clamp Time and Fluid Rate charts for flow rate limits and time calculations needed to avoid cylinder damage and preserve warranty.

Metric High Capacity, Low Profile Swing Clamps, Bottom Flange/Manifold Mount

Specifications

Specifications Model No. Swing Direction Straight Cylinder Capacity (kN) * Vertical Clamp Stroke ** Total Stroke (Swing + Vertical) Piston Area (cm2) Oil Capacity (cm3) Wght (G) Optional Flow Control Model No. Extend Retract Extend Retract Extend Retract Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned. 41-5222-11 41-5222-12 41-5222-10 Right Left Straight N/A 22 13,0 13,0 28,0 28 N/A 7,6 N/A 21,0 3030 47-0203-74 41-5233-11 41-5233-12 41-5233-10 Right Left Straight N/A 33 14,7 14,7 30,0 30 N/A 11,4 N/A 34,3 4854 47-0203-74 Double Acting (D/A) Cylinders, actuated hydraulically both directions.. 41-5222-21 41-5222-22 41-5222-20 Right Left Straight 54 22 13,0 13,0 28,0 28 15,5 7,6  43,0 21,0 3070 47-0203-74 41-5233-21 41-5233-22 41-5233-20 Right Left Straight 80 33 14,7 14,7 30,0 30 22,8 11,4 68,6 34,3 4854 47-0203-74

WARNING: Never allow swing arm to contact workpiece or fixture during rotation.

*Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. See the Arm Length and Pressure Limitations graph for clamping force with a VektorFlo^® short swing arm. The clamping force is adjustable by varying the hydraulic system pressure. To calculate the approximate output force for your application, divide the cylinder capacity from the graph by 350 (35 MPa), and multiply the result by Your System Operating Pressure. Actual force will vary slightly due to internal cantilever loading, friction loss and/or return springs.

** To allow for piece part height variations, it is recommended that the vertical travel be set at about 50% of the vertical stroke.

NOTE: To insure maximum service life and trouble-free operation, restrict fluid flow to the level indicated in the Clamp Time and Fluid Flow Rate chart.

Metric High Capacity, Low Profile Swing Clamps, Bottom Flange/Manifold Mount

Dimensions

All dimensions are in mm.

Order arms separately