
	Rapid Order View Cart Login Sign Up

Metric

You have 0 item(s)
in your cart.
View Cart

Metric

Threaded

Home > Products > Metric > Push/Pull Cylinders > Threaded
Threaded (PDF 572.00 KB)

Specifications

Metric Push/Pull Cylinders, Threaded Body

Specifications

Model No.	Cylinder Capacity (kN)**		Vertical Clamping Stroke (mm)	Body Thread	Effective Piston Area (cm²)		Oil Capacity (cm³)****
Specifications
Model No.	Extend	Retract	Vertical Clamping Stroke (mm)	Body Thread	Extend	Retract	Extend	Retract
Single Acting (S/A) Cylinders, actuated hydraulically and spring returned.
42-5010-51	N/A	2,1	14,5	M28 x 1,5	N/A	0,63	N/A	0,92
42-5010-91	N/A	6,2	20	M38 x 1,5	N/A	1,90	N/A	3,82
42-5011-31	N/A	13,7	29,5	M48 x 1,5	N/A	4,04	N/A	11,9
42-5018-00	N/A	24,9	42	M65 x 1,5	N/A	7,60	N/A	32
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
42-5020-51	5,3	2,1	14,5	M28 x 1,5	1,61	0,63	2,3	0,92
42-5020-91	13,3	6,2	20	M38 x 1,5	3,88	1,90	7,8	3,82
42-5021-31	27,1	13,7	29,5	M48 x 1,5	7,92	4,04	23	11,9
42-5028-00	53,3	24,9	42	M65 x 1,5	15,52	7,60	65,4	32

** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output forcecan be adjusted by varying the hydraulic system pressure. to calculate the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to frictional loss, seal and wiper drag, and/or return spring forces.

Features

Metric Push/Pull Cylinders, Threaded Body

Single And Double Acting

Available in capacities of 2,1 kN, 6,2 kN, 13,7 kN and 24,9 kN
Single acting plunger is spring extended, hydraulically retracted
Several body styles provide a wide range of adjustment
Special concentric design models available to replace competitive products that fail
Also available in a straight line guided model, order as swing clamp

Hardened chrome alloy steel plungers run longer with less wear and drag than other brands

G Series porting is standard for easy access

Vent port with bronze filter gives the cylinder a place to "breathe" and helps keep chips from drawing past wipers (Can be used for a remote breather line. Used as the double acting unclamp port)

Proprietary seal designs reduce leakage and increase seal life for longer lasting, more dependable cylinders

Threaded plunger ends allow the attachment of arms, mechanisms or remote actuators

Push/pull cylinders are not shipped with cap screws.

Dimensions

Metric Push/Pull Cylinders, Threaded Body

Dimensions

Model No.	A	C	D	F	G	ØH	J
Dimensions
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
42-5010-51	M28 x 1,5	102	44	25,5	13	11,13	M6 x 1,0 x 7
42-5010-91	M38 x 1,5	134	60	31	13	15,88	M10 x 1,5 x 12
42-5011-31	M48 x 1,5	172	79	32	13	22,23	M12 x 1,75 x 13
42-5018-00	M65 x 1,5	236	115,5	34	13	31,71	M16 x 2,0 x 19
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
42-5020-51	M28 x 1,5	102	44	25,5	13	11,13	M6 x 1,0 x 7
42-5020-91	M38 x 1,5	134	60	31	13	15,88	M10 x 1,5 x 12
42-5021-31	M48 x 1,5	172	79	32	13	22,23	M12 x 1,75 x 13
42-5028-00	M65 x 1,5	236	115,5	34	13	31,71	M16 x 2,0 x 19

Model No.	N	P	R	ØT	u	v	w
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
42-5010-51	14,5	32	20,5	38	G1/8	25°	14
42-5010-91	20	38	26	47,5	G1/8	35°	19,5
42-5011-31	29,5	47,5	31,5	60	G1/4	30°	25,5
42-5018-00	42	65	37	73	G1/4	30°	33
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
42-5020-51	14,5	32	20,5	38	G1/8	25°	14
42-5020-91	20	38	26	47,5	G1/8	35°	19,5
42-5021-31	29,5	47,5	31,5	60	G1/4	30°	25,5
42-5028-00	42	65	37	73	G1/4	30°	33

All dimensions are in mm.

SpecificationsFeaturesDimensions

Metric Push/Pull Cylinders, Threaded Body

Specifications

Model No.	Cylinder Capacity (kN)**		Vertical Clamping Stroke (mm)	Body Thread	Effective Piston Area (cm²)		Oil Capacity (cm³)****
Specifications
Model No.	Extend	Retract	Vertical Clamping Stroke (mm)	Body Thread	Extend	Retract	Extend	Retract
Single Acting (S/A) Cylinders, actuated hydraulically and spring returned.
42-5010-51	N/A	2,1	14,5	M28 x 1,5	N/A	0,63	N/A	0,92
42-5010-91	N/A	6,2	20	M38 x 1,5	N/A	1,90	N/A	3,82
42-5011-31	N/A	13,7	29,5	M48 x 1,5	N/A	4,04	N/A	11,9
42-5018-00	N/A	24,9	42	M65 x 1,5	N/A	7,60	N/A	32
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
42-5020-51	5,3	2,1	14,5	M28 x 1,5	1,61	0,63	2,3	0,92
42-5020-91	13,3	6,2	20	M38 x 1,5	3,88	1,90	7,8	3,82
42-5021-31	27,1	13,7	29,5	M48 x 1,5	7,92	4,04	23	11,9
42-5028-00	53,3	24,9	42	M65 x 1,5	15,52	7,60	65,4	32

Metric Push/Pull Cylinders, Threaded Body

Dimensions

Model No.	A	C	D	F	G	ØH	J
Dimensions
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
42-5010-51	M28 x 1,5	102	44	25,5	13	11,13	M6 x 1,0 x 7
42-5010-91	M38 x 1,5	134	60	31	13	15,88	M10 x 1,5 x 12
42-5011-31	M48 x 1,5	172	79	32	13	22,23	M12 x 1,75 x 13
42-5018-00	M65 x 1,5	236	115,5	34	13	31,71	M16 x 2,0 x 19
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
42-5020-51	M28 x 1,5	102	44	25,5	13	11,13	M6 x 1,0 x 7
42-5020-91	M38 x 1,5	134	60	31	13	15,88	M10 x 1,5 x 12
42-5021-31	M48 x 1,5	172	79	32	13	22,23	M12 x 1,75 x 13
42-5028-00	M65 x 1,5	236	115,5	34	13	31,71	M16 x 2,0 x 19

Model No.	N	P	R	ØT	u	v	w
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
42-5010-51	14,5	32	20,5	38	G1/8	25°	14
42-5010-91	20	38	26	47,5	G1/8	35°	19,5
42-5011-31	29,5	47,5	31,5	60	G1/4	30°	25,5
42-5018-00	42	65	37	73	G1/4	30°	33
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
42-5020-51	14,5	32	20,5	38	G1/8	25°	14
42-5020-91	20	38	26	47,5	G1/8	35°	19,5
42-5021-31	29,5	47,5	31,5	60	G1/4	30°	25,5
42-5028-00	42	65	37	73	G1/4	30°	33

All dimensions are in mm.

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2013 Vektek, Inc.