* Clamp capacities are listed at 70 bar (7 MPa) maximum operating pressure with a standard length link clamp lever installed.
** Use of an extended length lever will result in a reduction of clamp capacity. See Link Clamp Lever Output Curves graph for clamping force with various lever lengths. The minimum operating pressure for low pressure link clamps is 10 bar (1 MPa). The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the clamp capacity shown above by 70 bar (7 MPa) and multiply the resultant number by your system operating pressure to obtain the approximate clamping force for your application (Actual force will vary slightly due to mechanical inefficiencies and friction.)
*** To insure maximum service life and trouble-free operation, restrict fluid flow to the above flow ratings when clamping. If you are unable to measure flow rates, the devices should be positioned in no less than ½ second. These recommendations apply when using the standard lever. When using the optional extended lever or your custom lever, please restrict the flow rates to position the lever in no less than 1 second.
**** Equal to ± 3° with standard lever
Note: User manufactured arms will reduce linkage life
All dimensions are in mm.
Levers sold separately.
NOTE: Levers are to be adjusted to within ±3° of nominal clamp angle to prevent premature failure.
M8 x 1,25