Hydraulic

Link Clamp Offset Levers

High Pressure Offset Link Clamp Lever Dimensions

Dimensions Model No. Cylinder Capacity S/A (lb) Cylinder Capacity D/A (lb) A B C D E F G Left Offset Lever, 1:1 Ratio 91-6004-04 350 450 2.00 0.63 0.50 0.1885 0.187 0.19 0.2505 61-6006-04 700 1100 2.50 0.88 0.63 0.2515 0.250 0.25 0.3755 91-6009-04 1300 2600 3.13 1.25 1.00 0.3765 0.375 0.38 0.5005 91-6014-04 3000 5000 4.00 1.75 1.25 0.5015 0.500 0.50 0.6255 91-6016-04 5000 6800 4.88 2.00 1.50 0.6265 0.625 0.63 0.7505 Right Offset Lever, 1:1 Ratio 91-6004-05 350 450 2.00 0.63 0.50 0.1885 0.187 0.19 0.2505 91-6006-05 700 1100 2.50 0.88 0.63 0.2515 0.250 0.25 0.3755 91-6009-05 1300 2600 3.13 1.25 1.00 0.3765 0.375 0.38 0.5005 91-6014-05 3000 5000 4.00 1.75 1.25 0.5015 0.500 0.50 0.6255 91-6016-05 5000 6800 4.88 2.00 1.50 0.6265 0.625 0.63 0.7505 Model No. Cylinder Capacity S/A (lb) Capacity D/A (lb) H J K L M N P Left Offset Lever, 1:1 Ratio 91-6004-04 350 450 0.88 0.13 0.44 0.44 0.26 1.00 1.75 61-6006-04 700 1100 1.13 0.13 0.56 0.56 0.32 1.25 2.25 61-6009-04 1300 2600 1.38 0.19 0.81 0.81 0.51 2.00 2.75 61-6014-04 3000 5000 1.75 0.25 1.19 1.19 0.63 2.50 3.50 61-6016-04 5000 6800 2.13 0.25 1.50 1.50 0.76 3.00 4.25 Right Offset Lever, 1:1 Ratio 91-6004-05 350 450 0.88 0.13 0.44 0.44 0.26 1.00 1.75 91-6006-05 700 1100 1.13 0.13 0.56 0.56 0.32 1.25 2.25 91-6009-05 1300 2600 1.38 0.19 0.81 0.81 0.51 2.00 2.75 91-6014-05 3000 5000 1.75 0.25 1.19 1.19 0.63 2.50 3.50 91-6016-05 5000 6800 2.13 0.25 1.50 1.50 0.76 3.00 4.25

All dimensions are in inches.

Link Clamp Offset Levers

High Pressure Single and Double Acting Offset Link Clamp Lever Output Curves

Follow this link for the best view of the output pressure charts.

NOTE: Modifications to levers that result in clamp ratios below 1:1 are not in the safe operating zone for the corresponding link clamp and could result premature failure.

Exceeding the allowable offset values and operating pressures specified in the tables will result in excessive forces on the link clamp pins, links, and rod which could result in premature failure.

Link Clamp Offset Levers

Low Pressure Link Clamp Offset Lever Dimensions

Dimensions Model No. Cylinder Capacity D/A (lb) A B C D E F G Left Offset Lever 91-6011-04 550 1.88 0.75 0.50 0.2515 0.19 0.19 0.2505 91-6015-04 1100 2.63 1.00 0.75 0.3765 0.31 0.31 0.3755 91-6021-04 2200 3.09 1.25 0.88 0.5015 0.38 0.38 0.5005 Right Offset Lever 91-6011-05 550 1.88 0.75 0.50 0.2515 0.19 0.19 0.2505 91-6015-05 1100 2.63 1.00 0.75 0.3765 0.31 0.31 0.3755 91-6021-05 2200 3.09 1.25 0.88 0.5015 0.38 0.38 0.5005 Model No. Cylinder Capacity D/A (lb) H J K L M N P Left Offset Lever 91-6011-04 550 0.75 0.13 0.50 0.50 0.26 1.00 1.69 91-6015-04 1100 1.00 0.31 0.75 0.69 0.39 1.50 2.25 91-6021-04 2200 1.19 0.38 0.94 0.88 0.45 1.75 2.69 Right Offset Lever 91-6011-05 550 0.75 0.13 0.50 0.50 0.26 1.00 1.69 60-6015-05 1100 1.00 0.31 0.75 0.69 0.39 1.50 2.25 60-6021-05 2200 1.19 0.38 0.94 0.88 0.45 1.75 2.69

All dimensions are in inches.

Low Pressure Offset Link Clamp Levers

Low Pressure Offset Link Clamp Output Curves

Follow this link for best view of Output charts

NOTE: Modifications to levers that result in clamp ratios below 1:1 are not in the safe operating zone for the corresponding link clamp and could resultpremature failure.

Exceeding the allowable offset values and operating pressures specified in the tables will result in excessive forces on the link clamp pins, links, and rod which could result in premature failure.

.