* Support capacities are listed at 5,000 psi maximum operating pressure. Support capacities for other pressures must be determined by consulting the capacity graph.
All dimensions are in inches.
* Plunger stroke "B" is the available work zone of the plunger. The work piece must be positioned inside this window to prevent part ejection.
** Shuttle Stroke "C" is the stroke the shuttle travels to position the work support plunger relative to the work piece.
*** The difference between "C" and "B" (C-B) equals the minimum distance the plunger is below the work piece in the retracted position.
Cavity Mounting Dimensions
Jacking Screw Directions for all Cartridge mount models:
To ease removal of a cartridge mount work support from the cavity, use the Jacking Screw feature built intotwo of the mounting holes in the body flange (opposite corners). thread two set screws into the mounting hole in the fixture with the top screw protruding above the fixture mounting surface. Then thread jacking screws into work support flange until they contact the set screws. Evenly turn jacking screws until the work support body can be removed from the cavity.