Valves usually mounted on the machine closer to the application,
Typically mounted behind or between 2 machines.
Recommended to run a continously
connected or single hose supply
decoupled system where the
pressurized time exceeds the
unpressurized time.
Operator interface is by remote
pendant or can be wired into a
machine controller.
NOTE: Should not be used with
palletized systems as the valve is
energized to unclamp. The unclamp
time will be excessive, causing the
valve to run hot.
1
2
4
55-7695-23-1
55-7695-23-2
55-7695-24-4
Recommended for continuously connected "live" systems.
Always connected to the fixture by means of hoses and or rotary unions.
Operator interface is a manual valve handle.
Pump located within operators reach.
55-7675-26-1
55-7675-26-2
55-7675-26-4
55-9575-16-1
55-9575-16-2
55-9575-16-4
Single acting live systems.
Use with manual pallet decouplers,
tombstone top plates, and
self-closing (single hose) decouplers.
NOTE: All decoupled valves are de-energized when in use to avoid heat build-up between cycles.
Double or single acting systems.
Use 1 or 2 handed auto-shutoff
pallet decoupler.
P-blocked center valve drops
pressure in both lines. Allows
decoupling and re-coupling of
the hoses.
Operator interface is remote
pendant or wired into a
55-7675-27-1 55-7675-27-2 55-7675-27-4
ILS557603 REV A
Note: 525-600V, 3-Phase service input pumps are available upon request for all convenience packages and configurations of 55-7685-XX-X