Metric

Metric Pressure Reducing Valve

Dimensions

Low Pressure PRV added to the Product Line Pressure Reducing Valve Model No. Inlet Pressure* Set Pressure Range Repeatability A Manifold Mount Valve Assembly 47-0540-01 350 bar (35 MPa) 52-310 bar (5,2 to 31,0 MPa  ± 7% 148 47-0540-03 < 200 bar 20 MPa) 10 - 62 bar (1 to 6,2 MPa) ± 10% 165 > 200 bar 20 MPa) 21-69 bar (2,1 to 6,2 MPa)   For proper sealing, the mating surface must be flat within 0.08 mm with a maximum surface roughness of 1,6 mµ Ra

 * Maximum system flow rate is 5.7 l/min. for all VektorFlo^® special function valves.  

Excess flow voids warranty.

Metric Pressure Reducing Valve

Operation: The Pressure Reducing Valve (PRV) is a Normally Open (N/O) pressure control device. The valve remains open and fluid flows freely to downstream devices (from the valve to devices) until the pressure in the valve reaches the pressure (adjustable) set-point. At the set-point pressure, the valve closes blocking further flow and pressure rise to the downstream devices. If there is a sufficient down stream pressure loss (from the valve to devices), the PRV will re-open, allowing flow to pass through the valve until the pressure again reaches the valve set-point. The PRV is designed for use in both single-acting and double-acting systems.

Metric Pressure Reducing Valve

Cartridge Dimensions

All dimensions are in mm.

Metric Pressure Reducing Valve

Cartridge Dimensions

Metric Pressure Reducing Valve

Pressure Graph