Metric

Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure with a standard VektorFlo^® arm installed. See the Arm Length and Pressure Limitations graph for clamping force with various other arm lengths installed.  The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity from the graph by 350 (35 MPa), and multiply the Resultant Number times Your System Operating Pressure to obtain the approximate clamping force for your application. Actual force will vary slightly due to internal cantilever loading, friction loss and/or return springs.

** To allow for piece part height variations, it is recommended that the vertical travel be set at about 50% of the vertical stroke.

*** To insure maximum service life and trouble-free operation, restrict fluid flow to the level indicated in theClamp Time and Fluid Flow Rate chart.

• Available in 22 kN and 33 kN capacities.with standard arm at 350 bar
• Ideal for Applications where speed is essential or massive arms are required
• Three cams for accurate arm positioning, smoother rotation and lower per cam surface contact pressure
• Manifold mounting and  porting capabilities
• Same footprint as the standard Low Profile Swing Clamps
• Order Arms separately
• Set system to the Clamp Time and Fluid Flow Rate chart
• Fluorocarbon wipers as standard for improved coolant compatibility
• TuffCam™ Low ProfileClocking feature.

U.S. Patent No. 5,820,118

BHC™ (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching.

SAE porting is all on the top of the cylinder body for easy access (bottom unclamp porting is available), no need to modify fixtures or reroute tubing to access cylinder end to unclamp.

Vent port with bronze filter gives single acting swing clamps a place to "breathe" and helps keep contamination from entering breather port.

For proper sealing, the mating surface
must be flat within 0.08 mm with a maximum 1,6 mµ R_a

All dimensions are in mm.