Metric

Metric Pull-Down Clamp, Eccentric

5-sided machining can be carried out safely without clamp interference Workpiece can be loaded and unloaded by handling equipment Optional oil supply through G1/4 port or manifold connection Disk spring for staged pull-down effect Body, sleeves and draw bar are made of nitride-hardened alloy steel for longer trouble-free life. Clamping sleeves are segmented and serrated to form and grip the clamping hole. These Pull-Down Clamps also serve as a support surface and "Z" locator for the workpiece.

Metric Pull-Down Clamp, Eccentric

Specifications

All dimensions are in mm.

Maximum Operating Pressure 150 bar (15 MPa)

Minimum Operating Pressure 30 bar (3 MPa)

Metric Pull-Down Clamp, Eccentric

Dimensions

Dimensions Model No. A ØB C± 0,01 D ØE ØF ØG H Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned. 41-5721-07 41-5721-08 59 80 75 9,5 6,6 7,5 24 6,8-7,7 7,8-8,7 10 41-5721-09 41-5721-10 59 80 75 9,5 8,5 9,5 24 8,8-9,7 9,8-10,7 10 41-5721-11 41-5721-12 59 80 75 12 10,5 11,5 24 10.8-11,7 11,8-12,7 13 41-5721-13 41-5721-14 59 80 75 12 12,5 13,5 24 12,8-13,7 13,8-14,7 13

All dimensions are in mm.

Maximum operating pressure 150 bar (15 MPa)

Minimum operating pressure 30 bar (3 MPa)

Metric Pull-Down Clamp, Eccentric

Mounting Specifications

NOTE: For manifold mounting, remove the M5 screw and sealing washer and insert the o-ring (included). For proper sealing, mating surfaces should be flat within ,08, with maximum surface roughness of 1,6 µm Ra.

All dimensions are in mm.

Maximum Operating Pressure 150 bar (15 MPa)

Minimum Operating Pressure 30 bar (3 MPa)