Warning! Never allow swing arm to contact workpiece or fixture during arm rotation.
*2600 lb Long Stroke are not interchangeable with TuffCam or Standard Swing Clamp models. Check overall dimensions for correct mounting in fixture.
**Cylinder capacities are listed at 5,000 psi maximum operating pressure, with a standard length Vektorflo® arm installed. Minimum operating pressure is 500 psi for double acting. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000, and multiply the resultant number X your system operating pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading and friction loss.)
*** To allow for work piece height variations, it is recommended that the vertical travel be set to about 50% of the vertical stroke.
**** To ensure maximum service life and trouble-free operation, restrict fluid flow per table
BHC™ (Black Hard Coating) on the cylinder bodies helps prevent leaks caused by scoring and scratching, especially in the event of high side or "kick" loads which promote excessive scoring in many other brands.
U.S. Patent No.
All dimensions are in inches.