** Cylinder capacities are listed at 5,000 psi maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area X Your System Operating Pressure. (Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.)
Single and Double Acting
Provides a long stroke in a compact body design. Can be mounted into fixture to reduce height.
Hardened chrome alloy steel plungers run longer with less wear and drag than other brands.
Vent port with bronze filter gives the cylinder a place to "breathe" and helps keep chips from drawing past wipers (unclamp port on double acting models).
Push/Pull cylinders shipped without capscrews
* Single Acting models must be vented. Do not install in blind holes.
All dimensions are in inches.
Push/Pull cylinders are not shipped with cap screws.
*The 30° lead in angle is to ensure trouble free seal installation.
Note: Flexible honing of cavity is strongly recommended. Flex-Hone™ is a registered trademark of Brush Research Manufacturing Co. Inc., Los Angeles, CA, 323-261-2193. Please contact Brush Research for additional information.