Hydraulic

WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation.

** Cylinder capacities are listed at 5,000 psi maximum operating pressure, with a standard length VektorFlo^® arm installed. Minimum operating pressure is 750 psi for single acting, 500 psi for double acting. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000, and multiply the Resultant Number X Your System Operating Pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, frictional loss, and/or return springs.)

*** To allow for work piece height variation, we recommend the arm contact point be set to approximate the midpoint of the clamping stroke.

**** To insure maximum service life and trouble-free operation, restrict fluid flow to the level indicated in the Clamp Time and Fluid Flow Rate Chart.

All dimensions are in inches.

• Simply the easiest to use manifold mount design on the market today. No precision installation holes, no precisely located ports, no special mounting hardware, only our special patented design gives you all that.
• Available in three sizes, 450, 1100 ando 2600 lb. capacity at 5,000 psi
• Unique, bolt up, bolt down or standard ported "foot" design allows you the maximum flexibility in fixture design
• Can be manifold face sealed or fittings may be used in the top and bottom ports (SAE 2)
• Standard Arm Clocking feature uses standard Vektek Arms
• Arms sold separately

Hardened V-cam tracks resist damage and give you a built in extra cam (opposite swing direction) or straight line option should you accidentally damage one. Specify left, right or straight cam, we'll preset the swing when you order.

SAE porting from three directions on larger models gives you five alternatives for plumbing. You can use standard fittings in any of the three sets of ports or manifold by bolting up or down.

Easily installed using standard capscrews. The large base and one piece mounting give this clamp excellent rigidity.

For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µin R_a surface finish.

For proper sealing, mating surface must be flat within 0.003 with a maximum 63 µin R_a surface finish.