
	Rapid Order View Cart Login Sign Up

Hydraulic

You have 0 item(s)
in your cart.
View Cart

Hydraulic

Top Flange

Home > Products > Hydraulic > Push/Pull Cylinders > Top Flange
Top Flange (PDF 179.00 KB)

Specifications

Manifold/Top Flange Push/Pull Cylinders

Specifications

Model No	Cylinder Capacity (lb.)**		Stroke (in.)	Extended Height (in.)	Piston Area (sq.in.)		Oil Capacity (cu.in.)		Optional Flow Control Model No.
Specifications
Model No	Extend	Retract	Stroke (in.)	Extended Height (in.)	Extend	Retract	Extend	Retract	Optional Flow Control Model No.
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
25-0505-00	N/A	470	0.57	4.00	N/A	0.098	N/A	0.056	70-2037-70
25-0509-08	N/A	1400	0.79	5.28	N/A	0.295	N/A	0.233	70-2037-71
25-0513-11	N/A	3100	1.16	6.78	N/A	0.626	N/A	0.726	70-2037-71
25-0518-00	N/A	5600	1.66	9.29	N/A	1.178	N/A	1.955	70-2037-72
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
25-0605-00	1200	470	0.57	4.00	0.249	0.098	0.142	0.056	70-2037-70
25-0609-08	3000	1400	0.79	5.28	0.601	0.295	0.475	0.233	70-2037-71
25-0613-11	6100	3100	1.16	6.78	1.227	0.626	1.423	0.726	70-2037-71
25-0618-00	12000	5600	1.66	9.29	2.405	1.178	3.992	1.955	70-2037-72

**Cylinder capacities are listed at 5,000 psi maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. (Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.)

Features

Manifold/Top Flange Push/Pull Cylinders

Single and Double Acting

Our tapered top flange is designed to keep chips and coolants away from the internal working cylinder parts
Bolt into place and plumb, or to eliminate the external plumbing, follow the easy-to-make manifold pattern
Use standard SAE fittings to plumb
Single piece body and mounting give a rigid installation, no additional mounting hardware to purchase or install
Fitting 30-8711-20 adapter assembly included and shipped with the clamp. Plugs also included and shipped
Also available in a straight line guided model, order as a swing clamp

Low install clamping height can be adjusted to fit your part with easy-to-make risers.

Standard SAE and manifold plumbing option are built into each unit.

Dimensions

Top Flange/Manifold Mount Push/Pull Cylinder

Dimensions

For proper sealing, mating surface must be flat within 0.003 in.
with a maximum 63 µin R_a surface finish.

Model No.	Capacity Extend/Retract	ØA	B	C	D	E	ØH	K	L
Dimensions
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
25-0505-00	N/A/470	0.99	4.02	0.75	2.02	0.31	0.437	0.57	1/4-28 x 0.28
25-0509-08	N/A/1400	1.43	5.32	1.03	2.60	0.38	0.625	0.79	3/8-24 x 0.47
25-0513-11	N/A/3100	1.74	6.82	1.06	3.35	0.41	0.875	1.16	1/2-20 x 0.52
25-0518-00	N/A/5600	2.37	9.31	1.47	4.43	0.54	1.250	1.66	5/8-18 x 0.75
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
25-0605-00	1200/470	0.99	4.02	0.75	2.02	0.31	0.437	0.57	1/4-28 x 0.28
25-0609-08	3000/1400	1.43	5.32	1.03	2.60	0.38	0.625	0.79	3/8-24 x 0.47
25-0613-11	6100/3100	1.74	6.82	1.06	3.35	0.41	0.875	1.16	1/2-20 x 0.52
25-0618-00	1200/5600	2.37	9.31	1.47	4.43	0.54	1.250	1.66	5/8-18 x 0.75

Model No.	øM	N	P	Q	R	S	T	V
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
25-0505-00	0.22	0.31	1.88	1.38	0.69	0.96	1.58	1.02
25-0509-08	0.28	0.50	2.31	1.75	0.88	1.24	2.06	1.32
25-0513-11	0.34	0.41	2.69	2.00	1.00	1.53	2.53	1.63
25-0518-00	0.41	0.75	3.61	2.73	1.37	2.05	3.34	2.13
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
25-0605-00	0.22	0.31	1.88	1.38	0.69	0.96	1.58	1.02
25-0609-08	0.28	0.50	2.31	1.75	0.88	1.24	2.06	1.32
25-0613-11	0.34	0.41	2.69	2.00	1.00	1.53	2.53	1.63
25-0618-00	0.41	0.75	3.61	2.73	1.37	2.05	3.34	2.13

Model No.	W	X	Y	Z	AA	AB	AC
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
25-0505-00	0.80	0.22	0.44	0.63	1.25	SAE 2	SAE 2
25-0509-08	1.03	0.34	0.56	0.84	1.69	SAE 4	SAE 4
25-0513-11	1.25	0.44	0.53	1.05	2.09	SAE 4	SAE 4
25-0518-00	1.72	0.60	0.75	1.41	2.81	SAE 4	SAE 4
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
25-0605-00	0.80	0.22	0.44	0.63	1.25	SAE 2	SAE 2
25-0609-08	1.03	0.34	0.56	0.84	1.69	SAE 4	SAE 4
25-0613-11	1.25	0.44	0.53	1.05	2.09	SAE 4	SAE 4
25-0618-00	1.72	0.60	0.75	1.41	2.81	SAE 4	SAE 4

All dimensions are in inches.

Push/Pull cylinders are not shipped with cap screws.

SpecificationsFeaturesDimensions

Manifold/Top Flange Push/Pull Cylinders

Specifications

Model No	Cylinder Capacity (lb.)**		Stroke (in.)	Extended Height (in.)	Piston Area (sq.in.)		Oil Capacity (cu.in.)		Optional Flow Control Model No.
Specifications
Model No	Extend	Retract	Stroke (in.)	Extended Height (in.)	Extend	Retract	Extend	Retract	Optional Flow Control Model No.
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
25-0505-00	N/A	470	0.57	4.00	N/A	0.098	N/A	0.056	70-2037-70
25-0509-08	N/A	1400	0.79	5.28	N/A	0.295	N/A	0.233	70-2037-71
25-0513-11	N/A	3100	1.16	6.78	N/A	0.626	N/A	0.726	70-2037-71
25-0518-00	N/A	5600	1.66	9.29	N/A	1.178	N/A	1.955	70-2037-72
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
25-0605-00	1200	470	0.57	4.00	0.249	0.098	0.142	0.056	70-2037-70
25-0609-08	3000	1400	0.79	5.28	0.601	0.295	0.475	0.233	70-2037-71
25-0613-11	6100	3100	1.16	6.78	1.227	0.626	1.423	0.726	70-2037-71
25-0618-00	12000	5600	1.66	9.29	2.405	1.178	3.992	1.955	70-2037-72

Top Flange/Manifold Mount Push/Pull Cylinder

Dimensions

For proper sealing, mating surface must be flat within 0.003 in.
with a maximum 63 µin R_a surface finish.

Model No.	Capacity Extend/Retract	ØA	B	C	D	E	ØH	K	L
Dimensions
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
25-0505-00	N/A/470	0.99	4.02	0.75	2.02	0.31	0.437	0.57	1/4-28 x 0.28
25-0509-08	N/A/1400	1.43	5.32	1.03	2.60	0.38	0.625	0.79	3/8-24 x 0.47
25-0513-11	N/A/3100	1.74	6.82	1.06	3.35	0.41	0.875	1.16	1/2-20 x 0.52
25-0518-00	N/A/5600	2.37	9.31	1.47	4.43	0.54	1.250	1.66	5/8-18 x 0.75
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
25-0605-00	1200/470	0.99	4.02	0.75	2.02	0.31	0.437	0.57	1/4-28 x 0.28
25-0609-08	3000/1400	1.43	5.32	1.03	2.60	0.38	0.625	0.79	3/8-24 x 0.47
25-0613-11	6100/3100	1.74	6.82	1.06	3.35	0.41	0.875	1.16	1/2-20 x 0.52
25-0618-00	1200/5600	2.37	9.31	1.47	4.43	0.54	1.250	1.66	5/8-18 x 0.75

Model No.	øM	N	P	Q	R	S	T	V
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
25-0505-00	0.22	0.31	1.88	1.38	0.69	0.96	1.58	1.02
25-0509-08	0.28	0.50	2.31	1.75	0.88	1.24	2.06	1.32
25-0513-11	0.34	0.41	2.69	2.00	1.00	1.53	2.53	1.63
25-0518-00	0.41	0.75	3.61	2.73	1.37	2.05	3.34	2.13
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
25-0605-00	0.22	0.31	1.88	1.38	0.69	0.96	1.58	1.02
25-0609-08	0.28	0.50	2.31	1.75	0.88	1.24	2.06	1.32
25-0613-11	0.34	0.41	2.69	2.00	1.00	1.53	2.53	1.63
25-0618-00	0.41	0.75	3.61	2.73	1.37	2.05	3.34	2.13

Model No.	W	X	Y	Z	AA	AB	AC
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
25-0505-00	0.80	0.22	0.44	0.63	1.25	SAE 2	SAE 2
25-0509-08	1.03	0.34	0.56	0.84	1.69	SAE 4	SAE 4
25-0513-11	1.25	0.44	0.53	1.05	2.09	SAE 4	SAE 4
25-0518-00	1.72	0.60	0.75	1.41	2.81	SAE 4	SAE 4
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
25-0605-00	0.80	0.22	0.44	0.63	1.25	SAE 2	SAE 2
25-0609-08	1.03	0.34	0.56	0.84	1.69	SAE 4	SAE 4
25-0613-11	1.25	0.44	0.53	1.05	2.09	SAE 4	SAE 4
25-0618-00	1.72	0.60	0.75	1.41	2.81	SAE 4	SAE 4

All dimensions are in inches.

Push/Pull cylinders are not shipped with cap screws.

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2013 Vektek, Inc.

Hydraulic

Hydraulic

Top Flange

Manifold/Top Flange Push/Pull Cylinders

Manifold/Top Flange Push/Pull Cylinders

Top Flange/Manifold Mount Push/Pull Cylinder

For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µin Ra surface finish.

For proper sealing, mating surface must be flat within 0.003 in.
with a maximum 63 µin R_a surface finish.