US Patent Nos.
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
All dimensions are in inches.
**Cylinder Capacities are listed at 5,000 psi maximum operating pressure, with a standard length VektorFlo® arm installed. Minimum operating pressure is 500 psi for Double Acting. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000, and multiply the Resultant Number X Your System Operating Pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, friction loss and seal drag.)
*** To allow for work piece height variation, we recommend the arm contact point be set to approximate the midpoint of the clamping stroke.
**** To insure maximum service life and trouble-free operation, restrict fluid flow to the level indicated on the Clamp Time and Fluid Flow Rate Chart.
Double Acting, Threaded Body
Special limiting capability prevents the total blockage of the flow path.
Note: Do not modify the needle valve or seat, excessive pressures may result.
Hardened V-cam tracks resist damage and give you a built in extra cam (opposite swing direction) or straight-line option should you accidentally damage one. Specify right, left or straight cam, we will preset the swing when you order.
Mounting hardware is available or you may tap your fixture and use a retaining collar to lock in place.
Standard SAE 4 O-ring porting makes plumbing simpler and leak-free.
Available only as a double-acting unit, springs cannot be used in this design.
Model No. 15-0209-09-L
Model No. 15-0209-09-R
Model No. 15-0209-09-S