
	Rapid Order View Cart Login Sign Up

Hydraulic

You have 0 item(s)
in your cart.
View Cart

Hydraulic

Fluid Advance

Home > Products > Hydraulic > Work Supports > Fluid Advance
Fluid Advance (PDF 1.00 MB)

Specs

Fluid Advance Work Supports

Specifications

Red background indicates new models

Model No.		Support Capacity* (lb.)	Mounting Style ***	Contact Force (lbs.)	Stroke (in.)	Base Dimensions (in.)	Retracted height (in.)	Oil Capacity ** (cu. in.)
Specifications
Fluid Advance Work Support, hydraulic pressure pushes a spring which lifts plunger; hydraulic pressure locks in place.
	10-0706-04	1000	Cartridge	1 - 6	0.25 0.50	N/A	2.12 2.62	0.08 0.09
NEW	10-0706-14	1000	Cartridge	1 - 6	0.25 0.50	N/A	2.12 2.62	0.08 0.09
	10-0806-05	1000	SAE/Manifold	1 - 6	0.25 0.50	0.90 X 1.31 X 1.75	2.51 3.01	0.16 0.17
NEW	10-0806-15	1000	SAE/Manifold	1 - 6	0.25 0.50	0.90 X 1.31 X 1.75	2.51 3.01	0.16 0.17
	10-0708-07	2500	Cartridge	3 - 10	0.25 0.50	N/A	2.83 3.33	0.12 0.14
NEW	10-0708-17	2500	Cartridge	3 - 10	0.25 0.50	N/A	2.83 3.33	0.12 0.14
	10-0808-07	2500	SAE/Manifold	3 - 10	0.25 0.50	1.25 X 1.50 X 2.31	3.25 3.75	0.19 0.21
NEW	10-0808-17	2500	SAE/Manifold	3 - 10	0.25 0.50	1.25 X 1.50 X 2.31	3.25 3.75	0.19 0.21
	10-0715-06	4000	Cartridge	8 - 12	0.50	N/A	2.85	0.59
	10-0815-06	4000	SAE/Manifold	8 - 12	0.50	0.99 X 2.88 X 3.19	3.25	0.65

* Support capacities are listed at 5,000 psi maximum operating pressure. Support capacities for other pressures must be determined by consulting the capacity chart.

** Restrict flow rate to a maximum of 130 cu. in./minute.

*** For cartridge mount models, see cavity dimensions.

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

Features

Fluid Advance Work Supports

For Retracted Plunger Applications

Available in three capacities 1000, 2500 and 4000 lb.
Normally retracted plungers do not interfere with part loading. Advance them with hydraulic pressure, exerting only spring force to bring the plunger into contact with your part (this force is not adjustable by adjusting hydraulic pressure). Hydraulic pressure then automatically sequences, "freezing" the plunger properly against the part. All this accomplished with a single hydraulic line
Ventless configuration and built in wiper keeps chips anddebris out, reducing the chance of plunger/sleeve stickingor binding.
Stainless steel plunger and sleeve assemblies help guard against corrosion in most machining environments.
Standard SAE porting and alternate
o-ring manifold face seal is located in the base of the support for bolt down installation, The base can be removed for direct cartridge mounting

Note: Heavy end effectors are not recommended.

Feeder caps and retaining collars are available as mounting options

Dimensions

Fluid Advance Work Supports

Dimensions

Red background indicates new models

For proper sealing, mating surface
must be flat within 0.003 with a
maximum 63 µin R_a surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N	P
Dimensions
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0806-05	1 - 16	2.51 3.01	0.25 0.50	1.17 1.67	0.90	0.21	0.88	0.62	0.14	1.31	0.66	0.90	0.45	1.75
10-0806-15	1 - 16	2.51 3.01	0.25 0.50	1.17 1.67	0.90	0.21	0.88	0.62	0.14	1.31	0.66	0.90	0.45	1.75
10-0808-07	1 1/4-16	3.25 3.75	0.25 0.50	1.35 1.85	1.25	0.36	1.13	0.81	0.19	1.50	0.75	1.06	0.53	2.31
10-0808-17	1 1/4-16	3.25 3.75	0.25 0.50	1.35 1.85	1.25	0.36	1.13	0.81	0.19	1.50	0.75	1.06	0.53	2.31
10-0815-06	2 1/4-16	3.25	0.50	1.57	0.99	0.50	2.00	1.50	0.19	2.88	1.44	2.06	1.03	3.19

Model No.	Q	R	S	T	V	W	X	Y	Z	AA	AB	AC	AD	AE
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0806-05	0.69	1.20	0.51	0.22	0.50	5/16 - 18 x 0.20	SAE 2	0.33	0.38	7°	0.38	0.69	YES	N/A
10-0806-15	0.69	1.20	0.51	0.22	0.50	3/8 - 24 x 0.20	SAE 2	0.33	0.38	7°	0.38	0.69	YES	N/A
10-0808-07	0.94	1.66	0.72	0.28	0.63	7/16 - 14 x 0.25	SAE 4	0.43	0.38	N/A	N/A	N/A	N/A	YES
10-0808-17	0.94	1.66	0.72	0.28	0.63	7/16 - 14 x 0.25	SAE 4	0.43	0.38	N/A	N/A	N/A	N/A	YES
10-0815-06	1.44	2.41	1.03	0.28	0.75	1/2 - 13 x 0.25	SAE 4	0.63	0.38	N/A	N/A	N/A	N/A	YES

*All dimensions are in inches.

Model No.	Capacity (lb)	A	B	C	D	E	F	G	H	J	K	L	M
Cartridge Dimensions
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04	1000	1 - 16	2.12 2.62	0.25 0.50	1.66 2.18	0.24	0.21	0.88	0.62	0.14	0.50	5/16 - 18 x 0.19	0.92
10-0706-14	1000	1 - 16	2.12 2.62	0.25 0.50	1.66 2.18	0.24	0.21	0.88	0.62	0.14	0.50	3/8 - 24 x 0.20	0.92
10-0708-07	2500	1 1/4-16	2.83 3.33	0.25 0.50	2.16 2.67	0.31	0.36	1.13	0.81	0.19	0.63	7/16 - 14 x 0.25	1.17
10-0708-17	2500	1 1/4-16	2.83 3.33	0.25 0.50	2.16 2.67	0.31	0.36	1.13	0.81	0.19	0.63	7/16 - 14 x 0.25	1.17
10-0715-06	4000	2 1/4-16	2.85	0.50	2.16	0.19	0.50	2.00	1.50	0.19	0.75	1/2 - 13 x 0.25	2.16

*All dimensions are in inches.

Contact Bolt

Self-produced Contact Bolt

Model No.	Capacity (lb)	O-Ring Part No.	ØA	B	ØC	D	E
Self-Produced Contact Bolt
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04 10-0806-05	1000 Std, Stroke	39-0000-59 (6 x 1.5 mm)	0.384	0.1.97	0.238	0.047	5/16 - 18 UNC - 2A
10-0706-14 10-0806-15	1000 Long Stroke	39-0000-69 (-903)	0.450	0.1.97	0.302	0.047	3/8 - 24- 18 UNF - 2A
10-0708-07 10-0808-07	2500 Std. Stroke	55-2500-05 (-011)	0.493	0.250	0.328	0.070	7/16 - 14 UNC - 2A
10-0708-17 10-0808-17	2500 Long Stroke	55-2500-05 (-011)	0.493	0.250	0.328	0.070	7/16 - 14 UNC - 2A
10-0715-06 10-0815-06	4000 Std. Stroke	39-0020-09 (-012)	0.555	0.250	0.390	0.070	1/2 - 13 UNC - 2A

Capacity Charts

Fluid Advance Work Supports

Capacity Charts

Cavity Dims

Fluid Advance Work Supports

Cavity Dimensions

Work Support Cavity Dimensions:

10-0706-04 #1000 Fluid Advance

Torque to 35 Ft Lbs.

Work Support Cavity Dimensions:

10-0708-07 #2500 Fluid Advance

Torque to 35 Ft Lbs.

Work Support Cavity Dimensions:

10-0715-06 #4000 Fluid Advance

Torque to 100 Ft Lbs.

Accessories

Fluid Advance Work Supports

Accessories

Model No.	A	B	C	D
Feeder Caps
For Use with Fluid Advance Work Supports Only
30-9872-40	1-16	1.00	0.53	1.25
30-9872-43	1 1/4-16	1.38	0.85	1.50
30-9872-47	2 1/4-16	0.99	0.59	2.50

Model No.	Fits Model No.	A	B	C	D
Shield for Fluid Advance Work Supports
For Use with Fluid Advance Work Supports Only
81-0707-01	10-0706-04	0.63	0.50	0.30	1.04
	10-0706-14
	10-0806-05
	10-0806-15
81-0708-01	10-0708-07	0.81	0.84	0.43	1.38
	10-0708-07
	10-0708-17
	10-0808-07
	10-0806-17
81-0715-01	10-0715-06	0.88	1.00	0.58	2.36
81-0715-01	10-0815-06	0.88	1.00	0.58	2.36

SpecsFeaturesDimensionsContact BoltCapacity ChartsCavity DimsAccessories

Fluid Advance Work Supports

Specifications

Red background indicates new models

Model No.		Support Capacity* (lb.)	Mounting Style ***	Contact Force (lbs.)	Stroke (in.)	Base Dimensions (in.)	Retracted height (in.)	Oil Capacity ** (cu. in.)
Specifications
Fluid Advance Work Support, hydraulic pressure pushes a spring which lifts plunger; hydraulic pressure locks in place.
	10-0706-04	1000	Cartridge	1 - 6	0.25 0.50	N/A	2.12 2.62	0.08 0.09
NEW	10-0706-14	1000	Cartridge	1 - 6	0.25 0.50	N/A	2.12 2.62	0.08 0.09
	10-0806-05	1000	SAE/Manifold	1 - 6	0.25 0.50	0.90 X 1.31 X 1.75	2.51 3.01	0.16 0.17
NEW	10-0806-15	1000	SAE/Manifold	1 - 6	0.25 0.50	0.90 X 1.31 X 1.75	2.51 3.01	0.16 0.17
	10-0708-07	2500	Cartridge	3 - 10	0.25 0.50	N/A	2.83 3.33	0.12 0.14
NEW	10-0708-17	2500	Cartridge	3 - 10	0.25 0.50	N/A	2.83 3.33	0.12 0.14
	10-0808-07	2500	SAE/Manifold	3 - 10	0.25 0.50	1.25 X 1.50 X 2.31	3.25 3.75	0.19 0.21
NEW	10-0808-17	2500	SAE/Manifold	3 - 10	0.25 0.50	1.25 X 1.50 X 2.31	3.25 3.75	0.19 0.21
	10-0715-06	4000	Cartridge	8 - 12	0.50	N/A	2.85	0.59
	10-0815-06	4000	SAE/Manifold	8 - 12	0.50	0.99 X 2.88 X 3.19	3.25	0.65

* Support capacities are listed at 5,000 psi maximum operating pressure. Support capacities for other pressures must be determined by consulting the capacity chart.

** Restrict flow rate to a maximum of 130 cu. in./minute.

*** For cartridge mount models, see cavity dimensions.

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

Fluid Advance Work Supports

Dimensions

Red background indicates new models

For proper sealing, mating surface
must be flat within 0.003 with a
maximum 63 µin R_a surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N	P
Dimensions
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0806-05	1 - 16	2.51 3.01	0.25 0.50	1.17 1.67	0.90	0.21	0.88	0.62	0.14	1.31	0.66	0.90	0.45	1.75
10-0806-15	1 - 16	2.51 3.01	0.25 0.50	1.17 1.67	0.90	0.21	0.88	0.62	0.14	1.31	0.66	0.90	0.45	1.75
10-0808-07	1 1/4-16	3.25 3.75	0.25 0.50	1.35 1.85	1.25	0.36	1.13	0.81	0.19	1.50	0.75	1.06	0.53	2.31
10-0808-17	1 1/4-16	3.25 3.75	0.25 0.50	1.35 1.85	1.25	0.36	1.13	0.81	0.19	1.50	0.75	1.06	0.53	2.31
10-0815-06	2 1/4-16	3.25	0.50	1.57	0.99	0.50	2.00	1.50	0.19	2.88	1.44	2.06	1.03	3.19

Model No.	Q	R	S	T	V	W	X	Y	Z	AA	AB	AC	AD	AE
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0806-05	0.69	1.20	0.51	0.22	0.50	5/16 - 18 x 0.20	SAE 2	0.33	0.38	7°	0.38	0.69	YES	N/A
10-0806-15	0.69	1.20	0.51	0.22	0.50	3/8 - 24 x 0.20	SAE 2	0.33	0.38	7°	0.38	0.69	YES	N/A
10-0808-07	0.94	1.66	0.72	0.28	0.63	7/16 - 14 x 0.25	SAE 4	0.43	0.38	N/A	N/A	N/A	N/A	YES
10-0808-17	0.94	1.66	0.72	0.28	0.63	7/16 - 14 x 0.25	SAE 4	0.43	0.38	N/A	N/A	N/A	N/A	YES
10-0815-06	1.44	2.41	1.03	0.28	0.75	1/2 - 13 x 0.25	SAE 4	0.63	0.38	N/A	N/A	N/A	N/A	YES

*All dimensions are in inches.

Model No.	Capacity (lb)	A	B	C	D	E	F	G	H	J	K	L	M
Cartridge Dimensions
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04	1000	1 - 16	2.12 2.62	0.25 0.50	1.66 2.18	0.24	0.21	0.88	0.62	0.14	0.50	5/16 - 18 x 0.19	0.92
10-0706-14	1000	1 - 16	2.12 2.62	0.25 0.50	1.66 2.18	0.24	0.21	0.88	0.62	0.14	0.50	3/8 - 24 x 0.20	0.92
10-0708-07	2500	1 1/4-16	2.83 3.33	0.25 0.50	2.16 2.67	0.31	0.36	1.13	0.81	0.19	0.63	7/16 - 14 x 0.25	1.17
10-0708-17	2500	1 1/4-16	2.83 3.33	0.25 0.50	2.16 2.67	0.31	0.36	1.13	0.81	0.19	0.63	7/16 - 14 x 0.25	1.17
10-0715-06	4000	2 1/4-16	2.85	0.50	2.16	0.19	0.50	2.00	1.50	0.19	0.75	1/2 - 13 x 0.25	2.16

*All dimensions are in inches.

Self-produced Contact Bolt

Model No.	Capacity (lb)	O-Ring Part No.	ØA	B	ØC	D	E
Self-Produced Contact Bolt
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04 10-0806-05	1000 Std, Stroke	39-0000-59 (6 x 1.5 mm)	0.384	0.1.97	0.238	0.047	5/16 - 18 UNC - 2A
10-0706-14 10-0806-15	1000 Long Stroke	39-0000-69 (-903)	0.450	0.1.97	0.302	0.047	3/8 - 24- 18 UNF - 2A
10-0708-07 10-0808-07	2500 Std. Stroke	55-2500-05 (-011)	0.493	0.250	0.328	0.070	7/16 - 14 UNC - 2A
10-0708-17 10-0808-17	2500 Long Stroke	55-2500-05 (-011)	0.493	0.250	0.328	0.070	7/16 - 14 UNC - 2A
10-0715-06 10-0815-06	4000 Std. Stroke	39-0020-09 (-012)	0.555	0.250	0.390	0.070	1/2 - 13 UNC - 2A

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2013 Vektek, Inc.

Hydraulic

Hydraulic

Fluid Advance

Fluid Advance Work Supports

Red background indicates new models

Fluid Advance Work Supports

Fluid Advance Work Supports

Red background indicates new models

For proper sealing, mating surface must be flat within 0.003 with a maximum 63 µin Ra surface finish.

Self-produced Contact Bolt

Fluid Advance Work Supports

Fluid Advance Work Supports

Fluid Advance Work Supports

For proper sealing, mating surface
must be flat within 0.003 with a
maximum 63 µin R_a surface finish.