Specifications
1 hp, 230/380/440 /VAC
3 ph, 50 HZ, 2850 rpm
8,2 L
6,6 L
48 to 350 bar (4,8-35,0 MPa)
0-690 bar silicone filled w/ pressure snubber
Single and/or Double Acting Depending on Valve Selection
See Pump Model Matrix for Specific Pump Number.
WARNING! The use of spool valves invalidates the warranty on VektorFlo® pumps
230/380/440 VAC, 50 HZ, 3 Phase
In operation, the pump turns on, builds to the preset pressure, then turns off. In the event of pressure decay, the pressure switch automatically restarts the pump to replenish system clamping pressure. The on-demand operation of the pump reduces electrical consumption and prevents overhearting of the oil which can occur in continuous running pumps.
The fluid level sensor prevents the pump from running without fluid. Should oil levels run low, the pump shuts down preventing potential damage.
Small size and high performance allow this pump to compete favorably with many single stage pumps requiring up to 1,50 KW motors.
Dimensions
Note: Cables omitted for clarity
Note: Pressure and return SAE 6 ports will not be used if pump is equipped with stacking blocks
Pump Systems Fully Configured Specifications
45-5924-32
45-5927-32
45-5929-32
24VDC 2/3 Normally Closed
Single Acting Decoupled System
45-5924-35
45-5927-35
45-5929-35
1
2
3
4
45-5924-01
45-5924-48
45-5924-11
45-5924-49
45-5927-01
45-5927-48
45-5927-11
45-5927-49
45-5929-01
45-5929-48
45-5929-11
45-5929-49
45-5924-04
45-5924-45
45-5924-46
45-5924-47
45-5927-04
45-5927-45
45-5927-46
45-5927-47
45-5929-04
45-5929-45
45-5929-46
45-5929-47
45-5924-05
45-5924-17
45-5924-23
45-5924-29
45-5927-05
45-5927-17
45-5927-23
45-5927-29
45-5929-05
45-5929-17
45-5929-23
45-5929-29
45-5924-33
45-5924-36
45-5924-37
45-5924-38
45-5927-33
45-5927-36
45-5927-37
45-5927-38
45-5929-33
45-5929-36
45-5929-37
45-5929-38
45-5924-03
45-5924-14
45-5924-20
45-5924-26
45-5927-03
45-5927-14
45-5927-20
45-5927-26
45-5929-03
45-5929-14
45-5929-20
45-5929-26
45-5924-07
45-5924-16
45-5924-22
45-5924-28
45-5927-07
45-5927-16
45-5927-22
45-5927-28
45-5929-07
45-5929-16
45-5929-22
45-5929-28
45-5924-09
45-5924-18
45-5924-24
45-5924-30
45-5927-09
45-5927-18
45-5927-24
45-5927-30
45-5929-09
45-5929-18
45-5929-24
45-5929-30
Warning: The use of spool valves invalidates the warranty on VektorFlo® pumps.
Note: Contact factory for custom pump configurations.
Note: When connecting solenoid valves to a machine controller, order model number 95-5342-28, machine controller cable. Plug the cable into the pump control box and follow the included instructions for connecting the four control wires to the machine controller. Each valve to be controlled by a machine controller requires one cable.
Note: Voltages listed are input to control box for pump motor. All solenoid valves use 24VDC control voltage supplied by the transformer internal to the pump control box. No wiring of control valves supplied with pump is not required.
Note: All pumps equipped with solenoid valves are supplied with one valve control pendant with a 1,8 meter cable.. For additional pendants order from the following chart.
Note: All pumps require a 20 amp dedicated service electrical power supply for proper operation and service life.
Note: All pumps are shipped without oil
Note: Pendant No. 70-7407-79 is only used and shipped with Pump Model
Nos. 45-5924-35 45-5927-35 and 45-5959-35
46-2559-00
0
46-2559-01
46-2559-02
46-2559-03
46-2559-04
Model No. 46-2559-05
46-2559-05
700